|
Note: Still need to move these over from my old site.
|
|
|
|
In case you are not familiar with the Chevy ZR2 factory RPO, this is the list of mods that it includes in addition to the normal 4x4 2-door Blazer LS package:
- Full ladder-type frame with modified suspension mounting points, providing:
- 3.9 inches wider than the regular S-10s
- 3 inch suspension height increase
- Enhanced front (7.25" ring gear) and rear (8.5" ring gear) axles with 3.73:1 rear-axle ratio
- Larger wheel and axle bearings
- 31x10.5R-15 LT/C black wall off-road tires (BFG A/Ts on pickups and BFG Long Trails on BlaZeR2)
- 46mm gas pressurized Bilstein Monotube shocks
- Rear axle track bar on pickups, rear sway bar on BlaZeR2s
- Wheel flares (black on S-10 pickups and BlaZeR2 / body-color on Sonoma pickups)
- 36mm (early model) / 28mm (late model) front anti-sway bar
- Skid plates
 |
| Extreme | Regular | ZR2 |
|
The old pages are still accessible here.
